Standars width 160 mm, on request it can be 110 or 240, INOX 150 mm.
Pre-assembled, mechanically resistant and watertight, it consists of a strip of PVC or silicone fabric combined with glass fiber, depending on the operating temperature. It is linked on both sides to a 0,6 mm thick galvanized steel strip, or on request AISI 304 stainless steel with 20 mm flanges and corners on both sides.
With flanges, bolts and clamps.
Standard model with PVC fabric can support temperature from -30°C to +80°C. High temperature model start from -40°C to +280°C.
GAR joints are used to isolate vibration generated by air handling units, fans or other equipment connected with air ducts.